http://WWW.SOLUTIONSCOMMUNICATIONS.IN
SOLUTIONSCOMMUNICATIONS 5ac74fba6a63e101bcbb61cb False 1364 80
OK
background image not found
Found results for
'5ghz 433mbps connections'
High-Speed Ethernet Over Coax Video Cable INR   0 INR  0
-NaN%

High-Speed Ethernet Over Coax Video Cable

HIGHWIRE turns any analogue video cable into a high-speed network connection. This allows the replacement of analogue cameras with IP cameras without installation of any new cabling, which can save some 30-40% of the system cost. Universal connections for coax, network and power, with no user set-up required, make installation easy and fast. APPLICATION IP Video Reuse legacy cable when upgrading from analog to IP security. Long range networking Use HIGHWIRE as a cost-effective means to deploy network connections beyond 100 metres - for example a buried RG-11 cable can be used to deliver a network connection between buildings 500 metres apart. Transportation HIGHWIRE can be used on legacy coaxial cables found in rail transport or elsewhere, and its universal power input makes it well-suited to low-voltage installations. Elevators and mechanisms Because coaxial cable will coil and bend properly, unlike Cat 5 cable, HIGHWIRE provides an ideal means to provide network access to elevator carriages, for VoIP, security, lift panel and other devices. Anywhere there's coax! HIGHWIRE has been deployed over all types of video cable, radar, TV antenna and satellite downlinks, armored steel cables, you name it. 50 ohm coax or cables of other impedance can normally be used without any modification to the unit. Tech Key : Range: Auto-optimizing for all 75 Ohm coaxial cable: 280m (920ft) full-rate over video-grade RG-59 (Up to 350m depending on cable quality) 350m (1150ft) full-rate over RG-6 500m (1640ft) full-rate over RG-11 Network: Auto-configuring for speed (10BASE-T or 100BASE-T) and duplex Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables Power: Auto type and polarity detection with detachable screw terminal connector 10-40V DC (max current 140mA at 12V) 20-28V AC (max current 70mA at 24V) Dimensions: 84 x 54 x 24mm (3.3 x 2.1 x 0.95in) / 102mm (4in) including connector 70g (2.5oz)

INR 0 INR 0

Availability:False

Pay mode:COD only

view details
Ethernet Extender for non-POE connections INR   0 INR  0
-NaN%

Ethernet Extender for non-POE connections

OUTREACH Lite provides a simple way to double the length of a 10/100 Ethernet connection. No configuration is required, it does not require a local power supply, and it does not restrict the throughput of the network link at all. Compact and wall-mountable, OUTREACH Lite takes its power from the network cable using the universal 802.3af Power over Ethernet (POE) standard. Network connections can easily be upgraded to POE compatibility if it is not already available using a simple injector. Note: OUTREACH Lite is powered by POE but does not forward it to other equipment. To extend network connections to devices that need POE or POE Plus, see Veracity's OUTREACH Max POE-forwarding Ethernet extender. Tech Key Feature: Range: At least 200m using a single OUTREACH Lite Up to 2200m when used with combinations of OUTSOURCE and OUTREACH Max Network: 10BASE-T / 100BASE-TX, full/half duplex (auto-negotiated) Patch or crossover cables POE in: IEEE 802.3af Class 2 powered device Device power 1.3 watts POE out: Not supported in OUTREACH Lite Dimensions: L 105mm x W 40mm x H 22mm APPLICATION : IP Video Use OUTREACH Lite to extend network connections to IP video cameras that are locally powered and only require an Ethernet connection without POE. OUTREACH Lite and OUTREACH Max can also be used to upgrade legacy twisted-pair video installations to IP, where the Cat 5 infrastructure for a network is already in place, but run lengths exceed the 100 meter limit for Ethernet. All cabled network installations OUTREACH Lite can be buried, located in conduits and plenum spaces, or wall mounted wherever network cable needs to run. Because OUTREACH Lite draws its own power from a POE source in the network closet, reliability and flexibility are maximised.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
BNC RG6 Connector INR   0 INR  0
-NaN%

BNC RG6 Connector

WBOX Model : WBC0EBNCMS. BNC PLUG BNC RG6 PLUG (Pack of 100) W Box BNC is full metal plug and used to connect a variety of different coaxial cables. It has a center pin connected to the center cable conductor and a metal tube connected to the outer cable shield. Ring outside the tube locks the cable to any female connector. Full metal plug connector • Connector is placed at the end of coaxial cables in order to link wiring to a piece of electronic devices like camera or DVR • After the Conductor is inserted, it is locked via screw, causing pins in the socket to be connected to output interface • BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals. • BNC connector has excellent cable protection and retention. • Easy to install. • Suitable with RG6/RG59 cables

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
AC750 Wireless Dual Band Router (Archer C20) INR   0 INR  0
-NaN%

AC750 Wireless Dual Band Router (Archer C20)

upports 802.11ac standard - the next generation of Wi-Fi Simultaneous 2.4GHz 300Mbps and 5GHz 433Mbps connections for 733Mbps of total available bandwidth 3 external antennas provide stable omni directional signal and superior wireless coverage

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false